Stoptech Stainless Steel brake lines improve braking performance by reducing the amount of line expansion normally found in the stock rubber lines. By reducing the expansion, you get a quicker more- responsive pedal feel and overall improvement in brake feel. All Stoptech lines are tested to 4,500 psi which is almost 4 times the line pressure exerted by a vehicle’s master cylinder.
Part #: STP 950.47004
Warranty: No warranty
Location: Front
Quantity: 2
Material: Stainless Steel Braided
StopTech® is a registered brake line manufacturer with the United States DOT and all StopTech® Stainless Steel Brake Lines are manufactured to meet DOT Compliance Standards. StopTech® Stainless Steel lines also meet or exceed FMVSS 106 and applicable international and EU standards.
Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age. StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings. A variety of end fittings are available to meet most application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
Stoptech Stainless Steel Brake Lines Front Subaru STI 2004-2007/WRX 2006-2007
$66.00
Quicker, firmer, more consistent pedal response.
Description
Stoptech Stainless Steel brake lines improve braking performance by reducing the amount of line expansion normally found in the stock rubber lines. By reducing the expansion, you get a quicker more- responsive pedal feel and overall improvement in brake feel. All Stoptech lines are tested to 4,500 psi which is almost 4 times the line pressure exerted by a vehicle’s master cylinder.
StopTech® is a registered brake line manufacturer with the United States DOT and all StopTech® Stainless Steel Brake Lines are manufactured to meet DOT Compliance Standards. StopTech® Stainless Steel lines also meet or exceed FMVSS 106 and applicable international and EU standards.
Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.
StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings. A variety of end fittings are available to meet most application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
Related products
Cobb Tuning SF Intake System (2002-2007 WRX/2004-2007 STI/2004-2008 FXT)
$225.00Add to cartInvidia N1 Catback Exhaust System w/ Titanium Tip (2002-2007 WRX/STI)
$742.00Add to cartBCP X500+ STI Stage 1 Kit
$1,949.00 – $3,417.00Select options